“The wrong rack could be a safety hazard, scratch your vehicle, or make it easy to steal the bike” The objective is simple. You want to carry your bicycle on your vehicle. But there’s a seemingly dizzying selection of bike-rack styles and a wide range of prices from which to choose. In general, this is an advantage, but to get the right bike rack for your needs, you should do some research and compare the different makes and models. The right rack should fit the vehicle properly, securely transport the bikes, and fall within your budget. The wrong rack could be a safety hazard, scratch your vehicle, and possibly lead to a lost, stolen, or damaged bicycle.
Consider your needs
The key to choosing the right bike rack is accurately defining your needs and assessing your current vehicles. Consider the following when choosing a bike rack:
- How often will you use it?
- How many bikes need to be transported?
- Will you need to change vehicles (e.g., switch the rack between husband’s and wife’s vehicles)?
- Is the vehicle leased or rented?
- How much are you willing to spend?
- How important is security?
- How high can you lift a bicycle by yourself, and hold it in position with one hand?
- Do you have a special bike such as a tandem or one with an odd-shaped frame?
- Does your vehicle already have a tow hitch or roof-mounted utility rack? If so, what is the load capacity?
- Does your vehicle have a rear-mounted spare tire that will interfere with certain types of mounts?
- Do you engage in other sports or activities, which may make one rack type more useful or cost-effective than another?
Types of racks
Bike racks generally fall into three distinct categories:
All types have good and bad points, but not all are available for every vehicle. The strap-on is the least expensive, but the least secure; the roof rack is the most versatile, but the most difficult to use; and the hitch-mount is the most expensive, but easy to operate.
There are also specialty racks that are designed specifically for use with pickup trucks or for inside SUVs or vans. Some truck racks can be used above the bed, allowing for storage underneath. Others have specialty mounts that can be attached to rear-mounted spare tires and the rear ladders sometimes found on conversion vans.
Here’s a closer look at the strengths and weaknesses of the three main types of bike rack:
- Good option for a leased or rented vehicle, as they are typically not vehicle-specific
- Easier to lift and secure bikes in place
- Rack can be easily stored–even in trunk
- Starting well under $100, the least expensive of all types
- Straps can come loose, wear out, or snap
- Truck-mounted spoilers can get in the way
- Straps can be cut easily, compromising security of rack
- May be difficult to lock bikes to rack or car
- Bikes may be damaged from backing into an object or being hit by another vehicle
- Often padding needs to be added between the bikes to keep them from banging into each other and scratching
- Trunk cannot be opened with rack installed
- You could get a ticket if the license plate or taillights are obstructed
- Extra attachments may be needed to support odd-framed bikes
- Not recommended for Tandem bikes
- May block driver’s view out of rear window
- Modular setup allows additional cargo storage with an additional storage case
- The rack can be used for different activities, such as skiing and canoeing if you buy different accessories or carriers, or for transporting other objects like building materials
- Racks can be adapted to existing factory hardware or mounted with the rack manufacturer’s nonpermanent footing
- Lockable mounting available
- A sedan may hold four bikes, a large van as many as seven
- Can support tandem and odd-framed bikes, depending on the carrier “tray” design used
- Can be somewhat complicated to install
- Vehicle can’t go into parking garages or under any overhead structure with low clearance, including drive-through fast food restaurants.
- Increases wind resistance reducing gas mileage more than other types; also produces more apparent wind noise
- It can be hard to lift a bike onto a tall vehicle, which could cause scratches to the car’s roof or sides.
- May not fit properly on curved-roof vehicles or convertibles–check manufacturer’s fit guides for your vehicle.
- Touches the vehicle’s body; if installed when vehicle is dirty, may scratch paint
- Must take care not to exceed the vehicle or rack manufacturer’s rooftop weight allowance.
- Consumer Reports does not recommend carrying heavy rooftop loads on an SUV, as the higher center of gravity can compromise emergency handling, leading to a rollover accident.
- Easy to install–just slide it into the hitch
- Typically, no need to remove front wheels to mount bikes
- Easier to lift and secure bikes in place
- Much less chance of scratching vehicle’s paint when mounting bikes
- Added expense of trailer hitch, if the vehicle doesn’t have one
- Some hitches may require drilling holes in vehicle’s chassis or cutting rear fascia
- Some small cars are not rated for towing, and mounting a tow hitch can affect the warranty or cause problems when the vehicle is being serviced
- Bikes may be damaged either from backing into something or getting hit from behind
- If license plate or taillights are obstructed, you could get a ticket
- May need extra attachments to support odd-framed bikes
- May block driver’s view out of rear window
- Talking to experts and experienced bikers will help you narrow your choices. Also, check Internet chat rooms for personal opinions. Research and careful shopping will help you arrive at the best rack for your needs, budget, and lifestyle.